The Water Tank Waterproofing keeps the tank protected from cracks and avoids the growth of fungus and algae on the walls of a tank. Repairing an existing water tank is a difficult and tedious task. Hence, waterproof the water tanks during the construction of buildings and thank us later.
The seepage and leakage of water helps in the growth of fungus and algae and thus lead to the weakening of tank structure by developing cracks. Waterproofing a water tank keeps the water clean and safe for drinking purposes.
(For Water tank, dams and canals)
Mr Bull StrongCrete 57-WT speciality product for the areas like water tank, Canals, Dams etc. This product helps to protect the reserves from water leakage and seepage. It effectively protects the concrete and creates a tough bond between the concrete. It is made with Tetramine Elastomeric Latex for high penetration and excellent bonding.
Application:- Clean the surface by removing all the loose particles, dirt, oil and grease. Vacuum clean the surface to remove all dust and loose particles. Apply a coat of primer using Prime strong PDR 77 using a spray for better penetration and absorption.
Common Waterproofing:- Mix Mr Bull StrongCrete-57WT with cement in the ratio of 1:1 by volume and apply 2-3 coats.
As a bond coat in repair:- Mix Mr Bull StrongCrete-57WT with cement in 1:1.5 ratio by volume and apply on a pre-wetted surface. Overlay repair mortar when the bond coat still wet or tacky.
Repair mortar:- Mix Mr Bull StrongCrete-57WT by 0.5 kg, cement 1 kg and 2.5 kg sand, mix it properly for use as repair mortar along with 200 ml water by weight of cement for better workable consistency.
As screed Concrete:- Mix StrongCrete-57WT 10-15 kg with Grey Portland cement 50 kg, sand 100 kg and 80 kg 6 mm aggregates along with water 12 kg. Mix the entire material well before application.
